root/dev/isa/if_iee16.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


    1 /*      $OpenBSD: if_iee16.h,v 1.2 1997/11/07 08:06:59 niklas Exp $     */
    2 
    3 
    4 /*
    5  * Copyright (c) 1993, 1994, 1995
    6  *      Rodney W. Grimes, Milwaukie, Oregon  97222.  All rights reserved.
    7  *
    8  * Redistribution and use in source and binary forms, with or without
    9  * modification, are permitted provided that the following conditions
   10  * are met:
   11  * 1. Redistributions of source code must retain the above copyright
   12  *    notice, this list of conditions and the following disclaimer as
   13  *    the first lines of this file unmodified.
   14  * 2. Redistributions in binary form must reproduce the above copyright
   15  *    notice, this list of conditions and the following disclaimer in the
   16  *    documentation and/or other materials provided with the distribution.
   17  * 3. All advertising materials mentioning features or use of this software
   18  *    must display the following acknowledgement:
   19  *      This product includes software developed by Rodney W. Grimes.
   20  * 4. The name of the author may not be used to endorse or promote products
   21  *    derived from this software without specific prior written permission.
   22  *
   23  * THIS SOFTWARE IS PROVIDED BY RODNEY W. GRIMES ``AS IS'' AND ANY EXPRESS OR
   24  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
   25  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
   26  * IN NO EVENT SHALL RODNEY W. GRIMES BE LIABLE FOR ANY DIRECT, INDIRECT,
   27  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
   28  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
   29  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
   30  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
   31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
   32  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   33  *
   34  */
   35 
   36 /*
   37  * Definitions for EtherExpress 16
   38  */
   39 
   40 #define IEE16_ATTN              0x06    /* channel attention control */
   41 #define IEE16_IRQ               0x07    /* IRQ configuration */
   42 #define  IEE16_IRQ_ENABLE       0x08    /* enable board interrupts */
   43 
   44 #define IEE16_MEMDEC            0x0a    /* memory decode */
   45 #define IEE16_MCTRL             0x0b    /* memory control */
   46 #define  IEE16_MCTRL_FMCS16     0x10    /* MEMCS16- for F000 */
   47 
   48 #define IEE16_MPCTRL            0x0c    /* memory page control */
   49 #define IEE16_CONFIG            0x0d    /* config register */
   50 #define  IEE16_BART_LOOPBACK    0x02    /* loopback, 0=none, 1=loopback */
   51 #define  IEE16_BART_IOCHRDY_LATE        0x10    /* iochrdy late control bit */
   52 #define  IEE16_BART_IO_TEST_EN  0x20    /* enable iochrdy timing test */
   53 #define  IEE16_BART_IO_RESULT   0x40    /* result of the iochrdy test */
   54 #define  IEE16_BART_MCS16_TEST  0x80    /* enable memcs16 select test */
   55 
   56 #define IEE16_ECTRL             0x0e    /* eeprom control */
   57 #define  IEE16_ECTRL_EESK       0x01    /* EEPROM clock bit */
   58 #define  IEE16_ECTRL_EECS       0x02    /* EEPROM chip select */
   59 #define  IEE16_ECTRL_EEDI       0x04    /* EEPROM data in bit */
   60 #define  IEE16_ECTRL_EEDO       0x08    /* EEPROM data out bit */
   61 #define  IEE16_RESET_ASIC       0x40    /* reset ASIC (bart) pin */
   62 #define  IEE16_RESET_586        0x80    /* reset 82586 pin */
   63 #define  IEE16_ECTRL_MASK       0xb2    /* and'ed with ECTRL to enable read  */
   64 
   65 #define IEE16_MECTRL            0x0f    /* memory control, 0xe000 seg 'W' */
   66 #define IEE16_ID_PORT           0x0f    /* auto-id port 'R' */
   67 
   68 #define IEE16_ID                0xbaba  /* known id of EE16 */
   69 
   70 #define IEE16_EEPROM_READ       0x06    /* EEPROM read opcode */
   71 #define IEE16_EEPROM_OPSIZE1    0x03    /* size of EEPROM opcodes */
   72 #define IEE16_EEPROM_ADDR_SIZE  0x06    /* size of EEPROM address */
   73 
   74 /* Locations in the EEPROM */
   75 #define IEE16_EEPROM_CONFIG1    0x00    /* Configuration register 1 */
   76 #define  IEE16_EEPROM_IRQ       0xE000  /* Encoded IRQ */
   77 #define  IEE16_EEPROM_IRQ_SHIFT 13      /* To shift IRQ to lower bits */
   78 #define IEE16_EEPROM_LOCK_ADDR  0x01    /* contains the lock bit */
   79 #define  IEE16_EEPROM_LOCKED    0x01    /* means that it is locked */
   80 
   81 #define IEE16_EEPROM_ENET_LOW   0x02    /* Ethernet address, low word */
   82 #define IEE16_EEPROM_ENET_MID   0x03    /* Ethernet address, middle word */
   83 #define IEE16_EEPROM_ENET_HIGH  0x04    /* Ethernet address, high word */
   84 

/* [<][>][^][v][top][bottom][index][help] */