PORTNAME          226 dev/ic/sili.c  		    "active: %08x\n", PORTNAME(sp), is, is >> 16, SILI_PFMT_IS,
PORTNAME          269 dev/ic/sili.c  			    "(%08x) and resetting device.\n", PORTNAME(sp),
PORTNAME          284 dev/ic/sili.c  		    "active %08x\n", PORTNAME(sp), sactive ? "NCQ " : "",
PORTNAME          300 dev/ic/sili.c  		    PORTNAME(sp), timeout_slot, sp->sp_active);
PORTNAME          321 dev/ic/sili.c  		    PORTNAME(sp), slot, ccb->ccb_xa.state == ATA_S_ERROR ?
PORTNAME          336 dev/ic/sili.c  			    PORTNAME(sp));
PORTNAME          343 dev/ic/sili.c  			    "after error, state %02x\n", PORTNAME(sp),
PORTNAME          544 dev/ic/sili.c  		    "slot %d\n", PORTNAME(sp), ccb->ccb_xa.state,
PORTNAME          742 dev/ic/sili.c  	DPRINTF(SILI_D_VERBOSE, "%s: SSTS 0x%08x\n", PORTNAME(sp),
PORTNAME          753 dev/ic/sili.c  		    "reset\n", PORTNAME(sp));
PORTNAME          760 dev/ic/sili.c  	DPRINTF(SILI_D_VERBOSE, "%s: signature 0x%08x\n", PORTNAME(sp),
PORTNAME          874 dev/ic/sili.c  		    "slot %d\n", PORTNAME(sp), xa->state, xa->tag);
PORTNAME          883 dev/ic/sili.c  		    PORTNAME(sp), xa->state);
PORTNAME          917 dev/ic/sili.c  		printf("%s: error %d loading dmamap\n", PORTNAME(sp), error);
PORTNAME         1039 dev/ic/sili.c  		    PORTNAME(sp));
PORTNAME         1076 dev/ic/sili.c  		    "page read\n", PORTNAME(sp));
PORTNAME         1085 dev/ic/sili.c  		    PORTNAME(sp));
PORTNAME         1146 dev/pci/ahci.c 		printf("%s: CLO requested while port running\n", PORTNAME(ap));
PORTNAME         1152 dev/pci/ahci.c 		printf("%s: CLO did not complete\n", PORTNAME(ap));
PORTNAME         1169 dev/pci/ahci.c 	DPRINTF(AHCI_D_VERBOSE, "%s: soft reset\n", PORTNAME(ap));
PORTNAME         1179 dev/pci/ahci.c 		    PORTNAME(ap));
PORTNAME         1194 dev/pci/ahci.c 		    PORTNAME(ap));
PORTNAME         1201 dev/pci/ahci.c 		printf("%s: CLO %s, need port reset\n", PORTNAME(ap),
PORTNAME         1242 dev/pci/ahci.c 		    PORTNAME(ap), ahci_pread(ap, AHCI_PREG_TFD),
PORTNAME         1254 dev/pci/ahci.c 			    "still active.\n", PORTNAME(ap), ccb->ccb_slot);
PORTNAME         1276 dev/pci/ahci.c 	DPRINTF(AHCI_D_VERBOSE, "%s: port reset\n", PORTNAME(ap));
PORTNAME         1342 dev/pci/ahci.c 		printf("%s: error %d loading dmamap\n", PORTNAME(ap), error);
PORTNAME         1355 dev/pci/ahci.c 			    PORTNAME(ap), (unsigned long long)addr);
PORTNAME         1360 dev/pci/ahci.c 			    PORTNAME(ap), (int)dmap->dm_segs[i].ds_len);
PORTNAME         1612 dev/pci/ahci.c 		DPRINTF(AHCI_D_INTR, "%s: interrupt: %b\n", PORTNAME(ap),
PORTNAME         1648 dev/pci/ahci.c 		    " %b, DIAG: %b\n", PORTNAME(ap), err_slot, tfd,
PORTNAME         1667 dev/pci/ahci.c 			printf("%s: attempting to idle device\n", PORTNAME(ap));
PORTNAME         1670 dev/pci/ahci.c 				    PORTNAME(ap));
PORTNAME         1674 dev/pci/ahci.c 					    PORTNAME(ap));
PORTNAME         1687 dev/pci/ahci.c 				PORTNAME(ap), err_slot);
PORTNAME         1702 dev/pci/ahci.c 				    "disabling device.\n", PORTNAME(ap));
PORTNAME         1706 dev/pci/ahci.c 			    "all outstanding commands.\n", PORTNAME(ap));
PORTNAME         1734 dev/pci/ahci.c 		    PORTNAME(ap), is, AHCI_PFMT_IS);
PORTNAME         1778 dev/pci/ahci.c 		    PORTNAME(ap), slot, ccb->ccb_xa.state == ATA_S_ERROR ?
PORTNAME         1819 dev/pci/ahci.c 			    "re-enabling%s slots %08x\n", PORTNAME(ap),
PORTNAME         1856 dev/pci/ahci.c 		    "slot %d\n", PORTNAME(ccb->ccb_port), ccb->ccb_xa.state,
PORTNAME         1945 dev/pci/ahci.c 	DPRINTF(AHCI_D_VERBOSE, "%s: read log page\n", PORTNAME(ap));
PORTNAME         1989 dev/pci/ahci.c 		    PORTNAME(ap), ccb->ccb_slot);
PORTNAME         2006 dev/pci/ahci.c 			    "error?\n", PORTNAME(ap));
PORTNAME         2173 dev/pci/ahci.c 		    PORTNAME(ap));
PORTNAME         2178 dev/pci/ahci.c 	    PORTNAME(ap), ccb->ccb_slot);
PORTNAME         2263 dev/pci/ahci.c 		    "slot %d\n", PORTNAME(ccb->ccb_port), xa->state,
PORTNAME         2286 dev/pci/ahci.c 		    "before it got on chip\n", PORTNAME(ap), ccb->ccb_slot);
PORTNAME         2292 dev/pci/ahci.c 		    "command in slot %d\n", PORTNAME(ap), ccb->ccb_slot);
PORTNAME         2296 dev/pci/ahci.c 		    "handled%s\n", PORTNAME(ap), ccb->ccb_slot,
PORTNAME         2304 dev/pci/ahci.c 		    "IRQ handler didn't detect it.  Why?\n", PORTNAME(ap),
PORTNAME         2316 dev/pci/ahci.c 	DPRINTF(AHCI_D_TIMEOUT, "%s: run completion (1)\n", PORTNAME(ap));
PORTNAME         2323 dev/pci/ahci.c 		    "in slot %d, active %08x\n", PORTNAME(ap), ncq_cmd ? " NCQ"
PORTNAME         2328 dev/pci/ahci.c 			    "handling, disabling it\n", PORTNAME(ap));
PORTNAME         2335 dev/pci/ahci.c 			    "%08x\n", PORTNAME(ap), ncq_cmd ? " NCQ" : "",
PORTNAME         2344 dev/pci/ahci.c 	DPRINTF(AHCI_D_TIMEOUT, "%s: issue pending\n", PORTNAME(ap));
PORTNAME         2351 dev/pci/ahci.c 	DPRINTF(AHCI_D_TIMEOUT, "%s: run completion (2)\n", PORTNAME(ap));
PORTNAME         2354 dev/pci/ahci.c 	DPRINTF(AHCI_D_TIMEOUT, "%s: splx\n", PORTNAME(ap));